R750EU5 - IE3 - TE4 - IE4 - ISE4
English 19 Ed.8 / 10-2012
GB
Unit of
measure-
ment R754TE4 R754IE4 R754ISE4
Cooler water/oil
Crankshaft rotation Anticlockwise (observing the engine from the handwhe el side)
Combustion sequence 1-3-4-2 1-3-4-2 1-3-4-2
Timing
Pushrods and rocker arms With hydraulic tappets and
camshaft
Gear cascade control and camshaft tted on the
crankbase
Minimum idling speed (standard
engine) rpm 800 800 800
Dry shipping weight of engine kg 260 260 260
Maximum permanent lengthwise
inclination (with handwheel up) degrees 30° 30° 30°
Maximum permanent lengthwise
inclination (with handwheel down) degrees 35° 35° 35°
Maximum permanent crosswise
inclination degrees 30° 30° 30°
Power and torque
Maximum operating speed rpm 2600 2600
Maximum power
kW (CV) @
rpm
80 (108.8) @
2600
55.4 (75.3) @
2600
Maximum torque
Nm (kgm)
@ rpm
420 (42.8) @
1100
310 (31.6) @
1100
Consumption at maximum
power
Specic fuel consumption g/kWh 222.5 217.7
Specic oil consumption g/kWh 0,2 0.2
Fuel supply circuit
Type of injection Common Rail direct injection with high pressune injection pump
Type of fuel
The engine has been designed to be powered by standard
fuels available on the European market (according to
specications DIN EN 590). If it is to be powered by
BIODIESEL fuels (according to specications UNI EN
14214), it can be mixed, up to 5%, with fuel available on
the European market (according to regulation DIN EN
590).
i
IMPORTANT
Do not use fuels with specications other than
those indicated.
To Next Page
Loading...
