– Depending on the equipment, reconnect plug-in connection
-1-.
– Fit hose connection -2- onto spray jet and lock hose clip -3-.
– Starting at the top, push spray jet into mounting hole until it
locks in place audibly.
– Adjusting spray jets ⇒ page 61 .
2.5 Adjusting spray jets
Note
In case of uneven spray field due to soiling in the spray jet, remove
spray jet and rinse it through with water counter to spraying di‐
rection. Subsequent blowing through with compressed air against
the spraying direction is permitted. Do not use any objects for
cleaning spray jets.
Adjusting spray jets for windscreen washer system: “Maintenance
manual” ⇒ Maintenance ; Booklet 35.1 ; Descriptions of work .
up! 2017 ➤ , up! 2020 ➤
Electrical system - Edition 10.2019
2. Windscreen washer system 61
To Next Page
Loading...
Need help?
General
