VOLTCRAFT DL-200T - Page 64

64
Symbol Meaning
hPa/
mmHg/
kPa
Unit for air pressure value
(DL-220THP only)
ID Logger ID
MAX/MIN Maximum/minimum measurement
USB Connected to computer.
USB PDF Connected to computer and generating PDF report.
PAUSE Indicates that the limit alarm pause function is enabled.
MODE
START
Indicates that a start mode has been chosen. It will be
shown before recording starts.
MODE
STOP
Indicates that a stop mode has been chosen. It will be
shown before recording ends.
TIME
START
Indicates remaining time before start of recording.
TIME
STOP
Indicates remaining time until end of recording.
Ready to start recording by holding button ENTER (8)
for few seconds. (Select “START UPON KEYPRESS” as
“RECORD START CONDITION” during conguration.)
Recording can be stopped by holding button ENTER (8)
for few seconds. (Select “STOP BUTTON” as “STOP
STYLE” during conguration.)