VOLTCRAFT DL-200T - Measurement Basic Settings

72
“MEASURE-
MENT” options
Here you select the logging parameters for your
data logger.
For further instructions, please refer to
““MEASUREMENT” options - “BASIC SETTING””
on page 72 and ““MEASUREMENT” options -
“ALARM SETTING”” on page 75.
“PDF REPORT
OPTIONS”
Here you dene the content and name of the PDF
report.
For further instructions, please refer to ““PDF
REPORT OPTIONS”” on page 76.
Other settings
Here you can create the conguration le, load a
previous setting or restore entries to default.
For further instructions, please refer to “Other
settings” on page 77.
“MEASUREMENT” options - “BASIC SETTING”
Select “MEASUREMENT” in the navigation bar and enter settings in
“BASIC SETTING”.
“LOGGER
ID”
Logger ID is a four digit identifier. Enter a number
between 0000 and 9999 e.g. 0014.
Use different logger IDs to identify data loggers with e.g.
different conguration le for different usage.