VOLTCRAFT DL-200T User Manual

73
“RECORD
START
CONDITION”
Select one of the following options to determine when
data logger starts recording. Each option has a default
stop setting.
“IMMEDIATELY UNTIL MEMORY FULL”: Data logger
starts recording data immediately until the memory
is full.
“START UPON KEYPRESS”: Data logger starts
recording after holding button ENTER (8) pressed for
few seconds. Data logger stops recording until memory
is full.
“START UPON START TIME”: Data logger starts
recording at a dened date and time until the memory
is full.
“START/STOP TIME”: Data logger starts and stops
recording data at a dened date and time.
“RECORD
START
CONDITION”
“CIRCULAR LOGGING”: Data logger starts recording
immediately and circularly. The newest data overwrites
the oldest data. It stops recording/logging once the
battery is depleted or “CIRCULAR LOGGING” has been
replaced by another “RECORD START CONDITION”
during conguration.

VOLTCRAFT DL-200T Specifications

General

Brand	VOLTCRAFT
Model	DL-200T
Category	Data Loggers
Language	English