VOLTCRAFT DL-200T User Manual

74
“STOP
STYLE”
Select one of the following options to determine when
data logger ends recording.
“NONE”: No stop condition is specied. Data logger
stops recording based on the “RECORD START
CONDITION” setting.
“STOP BUTTON”: Data logger stops recording after
holding button ENTER (8) pressed for few seconds.
“AFTER PDF CREATED”: Data logger stops recording
after PDF report is generated.
“START
TIME”
Dene date and time when to start recording data.
“STOP
TIME”
Dene date and time when to stop recording data.
“START
DELAY
MINUTES”
Dene delay time of immediate start of recording.
“SAMPLING
RATE”
Dene how frequent the data logger measures and
records data in “MINUTES” or “HOURS”.
When using the data logger at extremely low
temperatures, choose a longer sampling rate to
decrease power consumption and to prolong the
battery life.
“RECOR-
DING TIME”
This value is automatically calculated based on the
sampling rate and cannot be set by the user.
“LED FLASH
INTERVAL”
Select how fast the LED control lights (2,3) shall ash.
Choose an interval of 5, 10, 15, 20, 25 or 30 seconds.

VOLTCRAFT DL-200T Specifications

General

Brand	VOLTCRAFT
Model	DL-200T
Category	Data Loggers
Language	English