89
When the limit pause function is activated during recording, there will be not
any alarm indicator “√” or “X”. LED-alarm status, maximum and Minimum
values will not be updated.
f) Read maximum/minimum measurements
short
press
ENTER
short
press
ENTER
• Press button DOWN (6) in the function menu several times until you
reach the record (e.g. temperature), from which you wish to read the
maximum and minimum readings.
• Press button ENTER (8) to enter maximum and minimum reading mode.
• Press button ENTER to switch between maximum and minimum reading
in that selected record.
• Press button DOWN to leave the maximum and minimum reading mode.
“MAX” indicates maximum and “MIN” indicates minimum value.
Maximum and minimum measurements are recorded from the
moment recording starts.
For latest readings, the data logger will sense and update the value
on display, unless the limit pause function has been activated.
Maximum and minimum readings will stop updating once the device
stops logging.
To Next Page
Loading...
Need help?
General
