VOLTCRAFT DL-200T User Manual

71
c) Create conguration le by software and load the
conguration le created from software onto data logger
• Connect the data logger to your computer.
• Start the Voltsoft software and follow the operating instructions in the
software manual (section 6 and choose your supported device).
• Disconnect the data logger from your computer.
d) Perform conguration setting on the website
There are 3 options to open the conguration website:
• Open www.conrad.com in a browser and navigate to the data logger
product page by using the item number (e.g. 1435090 for DL-200T
data logger). Click on the link for the conguration website to open the
website.
• Open http://datalogger.voltcraft.com/CongBuilder/index.jsp in a
browser.
• Connect the data logger to your computer. Open the data logger drive
on your computer. Click on the link “Conguration Website.html” to open
the conguration website.
Main Screen - Overview
General
Settings
Choose the desired language for the website by
clicking on the corresponding ag.
Select the model of your data logger. The model
name is mentioned on the packaging and/or
product. Chosen model type will be highlighted
in red.

VOLTCRAFT DL-200T Specifications

General

Brand	VOLTCRAFT
Model	DL-200T
Category	Data Loggers
Language	English