VOLTCRAFT DL-200T - Page 82

82
Mode 10
Function Logging starts and stops at dened time.
Setting • Select “START/STOP TIME” as “RECORD START
CONDITION”.
• Define start recording date and time in field “START
TIME”.
• Define stop recording date and time in field “STOP
TIME”.
Mode 11
Function Logs data immediately and circularly.
Logging stops once the battery is depleted or “CIRCULAR
LOGGING” has been replaced by another “RECORD
START CONDITION” during conguration.
Setting • Select “CIRCULAR LOGGING” as “RECORD START
CONDITION”.
Mode 12
Function Logs data immediately and circularly.
Should you wish an additional stop mode you choose:
Logging stops when button ENTER is pressed for few
seconds
Setting • Select “CIRCULAR LOGGING” as “RECORD START
CONDITION”.
• Select “STOP BUTTON” as “STOP STYLE”.