(1) Press the ▼ key to select Memory submenu. Press the ＜ / ＞ key to select
Internal or External.
(2) When the Memory is set as Internal, press the ▲ key to select Read submenu. Press
the ＜ / ＞ key to select the channel (CH1, CH2 or CH3), press the key to
read the recording file of the selected channel. After reading successfully, if the
display mode is set as Table, a red box will show in the table, indicating you can
press the ＜ / ＞ key to turn the page. Press ← to back to sub menu
selection.
When the Memory is set as External, press the ▲ key to select Export submenu.
Press the ＜ / ＞ key to select the channel (CH1, CH2 or CH3), press the key
to export the recording file of the selected channel onto the U disk. The directory is
DLPXXXX\Record_Auto (DLPXXXX is the model).
(3) Press the ▼ key to select Display submenu. Press the ＜ / ＞ key to select Graph
or Table.
Graph display mode
Table display mode
(4) Press the ▼ key to select Clear submenu. Press the key to clear the recording
To Next Page
Loading...
