VOLTCRAFT DLP-3303 - Auto Record; View Record

14
(3) Press the ▼ key to select Delete submenu. Press the key, a red box will show
in the table, indicating the selected item. Press the ▲ / ▼ key to select. Press the
＜ / ＞ key to turn the page. Press the key to delete. Press ← to back to
sub menu selection.
(4) Press the ▼ key to select Recall submenu. Press the key, a red box will show in
the table, indicating the selected item. Press the ▲ / ▼ key to select. Press the ＜
/ ＞ key to turn the page. Press the key to recall. Press ← to back to sub
menu selection.
4.5.2 Auto Record
Press the Record key, turn the knob to select [Auto Record].
(1) The Memory sub menu is selected. Press the ＜ / ＞ key to select Internal or
External.
(2) Press the ▼ key to select Interval submenu. Use the numeric keys to set the record
interval, press the key to confirm.
(3) Press the ▼ key to select Points submenu. Use the numeric keys to set the points,
press the key to confirm.
(4) Press the ▼ key to select Record Status submenu. Press the ＜ / ＞ key to select
the channel (CH1, CH2 or CH3), press the key to start recording the output of
the selected channel. Press the key again to stop recording. During recording,
the icon will be lighted on the status bar.
Note: When the memory is set as External, the record file will be saved to U disk as a
CSV file, the directory is DLPXXXX\Record_Auto (DLPXXXX is the model).
4.5.3 View Record
Press the Record key, turn the knob to select [View Record].