EasyManua.ls Logo

Volvo Penta D13 - Air Filter, Change; Drive Belt and Alternator Belt, Inspection

Volvo Penta D13
108 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Air Filter, Change
1 If indicator is all red after the engine is stopped,
change the filter insert.
2 Undo the clamps and remove the lid from the filter
housing.
3 Remove the old filter. Be careful to ensure that no
contamination gets into the engine.
4 Install a new air filter and tighten the lid.
5 Reinstate the pressure drop indicator by pressing
in the indicator button.
IMPORTANT:
Scrap the old filter; it may not be cleaned.
Drive Belt and Alternator Belt,
Inspection
WARNING!
Stop the engine before doing any maintenance work.
Inspections must be carried out after operations, while
the belts are hot.
You should be able to depress the alternator belt and
the drive belt about 3-4 mm between the pulleys.
The alternator belts and drive belts have automatic belt
tensioners and do not need to be adjusted.
Check the condition of the drive belts. Change as
necessary, refer to Alternator Belt, Replace, page 67
and Drive belt, change, page 66.
Maintenance
47710406 10-2018 © AB VOLVO PENTA 65

Table of Contents

Related product manuals