Control lever
Reason: Signal fault in control lever.
Symptom: Limp Home engine speed might be activated.
Action: Contact a Volvo Penta workshop.
Control lever failure
Reason: Control lever communication fault
Internal fault in ECU.
Symptom: Gear automatically set to neutral and engine speed reduced.
Action: Regain propulsion by moving lever to neutral.
Helm Control Unit failure
Reason: Internal fault in ECU.
Memory fault.
Symptom: The engine might not be able to start.
Action: Contact a Volvo Penta workshop.
Configuration fault
Reason: Incompatible software.
Chassis number mismatch with engine or between drivelines.
Driveline configuration fault.
Helm station configuration fault.
Incompatible software.
Symptom: The engine might not be able to start.
Action: Contact a Volvo Penta workshop.
Joystick failure
Reason: Failure in ECU or joystick.
Symptom: Joystick might not be available.
Action: Contact a Volvo Penta workshop.
Key Failure
Reason: Communication fault in key interface.
Action: Contact a Volvo Penta workshop.
Lanyard failure
Reason: Failure in Helm Control Unit (HCU).
Action: Contact a Volvo Penta workshop.
Power Control Unit failure
Reason: Communication in Powertrain Control Module (PCU).
Internal fault in ECU.
Action: Contact a Volvo Penta workshop.
Power trim failure
Reason: Power trim voltage too high or too low.
Symptom: Power trim disabled.
Action: Contact a Volvo Penta workshop.
RF connection error
Reason: Failure in battery system.
Action: Contact a Volvo Penta workshop.
Fault Code Register
108 47712786 11-2022 © AB VOLVO PENTA
To Next Page
Loading...
