Viscosity
Select the viscosity according to the table.
The temperature values refer to stable ambient
temperatures.
NOTICE! Volvo Penta recommendation for lowest
possible fuel consumption and optimal durability is to
use SAE 10W-30 oil when the viscosity table allows.
Fuel System
Fuel specification
The fuel must comply with national and international standards for commercially supplied fuels, such as:
EN 590 (with nationally adapted environmental and cold weather requirements)
ASTM D 975 No 1-D och 2-D
JIS K 2204
Sulfur content: Complying with legal requirements in each country. If the sulfur content exceeds 0.5 weight-
percent, the oil change intervals shall be changed, refer to Technical Data, page 102.
Extremely low sulfur content fuel (urban diesel in Sweden and city diesel in Finland) can cause a loss of up to 5
% of power and an increase in fuel consumption of about 2-3 %.
Technical Data
47713337 03-2021 © AB VOLVO PENTA 103
To Next Page
Loading...
