Other controls
Cabin 33
Cabin
Access to cab
– The cab door is fitted with an external door handle with a lock
(1) and an internal door handle (4).
– The door can be locked in open position by application of ma-
nual force (a fixed locking bolt (3) on the cab engages in the
round bolt receptacle (2) in the door).
– By pressing the unlocking button (5) the cab door can be un-
locked and closed.
IMPORTANT! Use handholds (6) to access the cab. Always
use the "3-point approach" to access or leave the cab, i.e.
two hands and one foot or one hand and both feet.
NOTE! On machines with protective roof use the frame to ac-
cess or leave the machine.
Cab equipment
Working lights
– The working lights (8) are used to illuminate the working area
under insufficient light conditions. The working lights are moun-
ted at the front (standard) and rear (option) of the cab.
Drawer
– The drawer (7) is used to store documents and onboard tools.
Windscreen
– The windscreen (9) can be loosened by turning the turning
locks (10) and push up under the cab roof.
IMPORTANT! Secure the windscreen under the cab roof with
turning locks, thus to prevent unintended closing.
– To close the windscreen (9) proceed in reverse order.
10
1011252
1012132
1
2
3
1012233
6
6
4
5
7
8
9
1012234
To Next Page
Loading...
