Service and maintenance
82
Cleaning the machine
Clean the machine regularly with commercially available car cle-
ansers in order to avoid damage to paintwork and other surfaces.
IMPORTANT! Do not use strong chemical cleansing agents.
This avoids damage to painted surfaces.
NOTE! Daily cleaning of areas susceptible for the accumula-
tion of dust, chips and other dirt reduces the fire hazard.
Recommendations for cleaning the machine
Q Park the machine in an area where the cleaning agents can be
collected.
Q Use conventional car cleansing agents and follow the cor-
responding instructions.
Q The water temperature should not exceed 60 °C (140 °F).
Q When using a pressure cleaner keep a minimum distance of 20
- 30 cm (8 - 12 in) between nozzle and machine surface.
Q Use a soft sponge.
Q Rinse the machine subsequently with clear water.
Paintwork care
Q Machines subjected to extreme environmental conditions will
corrode much quicker than other machines. We recommend to
treat the spray painted surfaces every six month as a preventi-
ve measure.
Q Clean the machine.
Q Apply Dinol 77B (or any compatible commercially available cor-
rosion protection agent).
Q Apply a protective layer of Dinitrol 447 (or any other compatible
commercially available corrosion protection agent) to heavily
strained surfaces.
Repairing paint damage
Q Check the painted surface for damage.
Q Clean the machine.
Q Repair each damage professionally.
To Next Page
Loading...
