176
ECS Gen. 2
Bogie lift + 30%
CAUTION
Ensure that this function is permissible for the particular
truck/suspension/tyre variant.
When the bogie switch is set to position 1 - trailing axle
lifted - and road speed < 30 km/h, the drive axle load may
increase by up to 30%.
Note: This applies only to suspension variants RALIM 115,
105 and 95.
DIH on pin X2-06 (CMR) to ʻYES” to activate bogie lift +
30%.
Fit Bogie Lift switch - One x 3 position switch.
Function 11
To Next Page
