Vortex IR610 Series - Page 56

IR610 high performance vector control frequency inverter user manual Chapter 5 function code table
- 52 -
Functio
n code
Parameter name
Description
Default
Property
Note: When the unit’s digit of P01.19 is set
to non-zero, this setting is invalid.
P01.22
Multiple step speed
1/in-built plc 2
Lower limit frequency(P01.09) ～ maximum
frequency(P01.06)
0.00Hz
☆
P01.23
Multiplestep speed
2/in-built plc 3
Lower limit frequency(P01.09) ～ maximum
frequency(P01.06)
0.00Hz
☆
P01.24
Multiple step speed
3/in-built plc 4
Lower limit frequency(P01.09) ～ maximum
frequency(P01.06)
0.00Hz
☆
P01.25
Multiple step speed
4/in-built plc 5
Lower limit frequency(P01.09) ～ maximum
frequency(P01.06)
0.00Hz
☆
P01.26
Multiple-step speed
5/in-built plc 6
Lower limit frequency(P01.09) ～ maximum
frequency(P01.06)
0.00Hz
☆
P01.27
Multiple step speed
6/in-built plc 7
Lower limit frequency(P01.09) ～ maximum
frequency(P01.06)
0.00Hz
☆
P01.28
Multiple step speed
7/in-built plc 8
Lower limit frequency(P01.09) ～ maximum
frequency(P01.06)
0.00Hz
☆
P01.29
Multiple step speed
8/in-built plc 9
Lower limit frequency(P01.09) ～ maximum
frequency(P01.06)
0.00Hz
☆
P01.30
Multiple step speed
9/in-built plc 10
Lower limit frequency(P01.09) ～ maximum
frequency(P01.06)
0.00Hz
☆
P01.31
Multiple step speed
10/in-built plc 11
Lower limit frequency(P01.09) ～ maximum
frequency(P01.06)
0.00Hz
☆
P01.32
Multiple step speed
11/in-built plc 12
Lower limit frequency(P01.09) ～ maximum
frequency(P01.06)
0.00Hz
☆
P01.33
Multiple step speed
12/in-built plc 13
Lower limit frequency(P01.09)～maximum
frequency(P01.06)
0.00Hz
☆
P01.34
Multiple step speed
13/in-built plc 14
Lower limit frequency(P01.09)～maximum
frequency(P01.06)
0.00Hz
☆
P01.35
Multiple step speed
14/in-built plc 15
Lower limit frequency(P01.09)～maximum
frequency(P01.06)
0.00Hz
☆
P01.36
Multiple step speed
Lower limit frequency(P01.09)～maximum
0.00Hz
☆