Vortex IR610 Series - Page 89

- 85-
11 Group Motor 1 Parameter
r11.00
Motor type
0：AC asynchronous motor
1：Synchronous motor(Special software)
See appendix parameter
0
●
P11.02
Motor rated power
0.1kW～800.0kW
 when power is less than 1kw ,0.75kw set
to 0.8 as per round up principle ,0.55kw
motor set 0.6
 when change motor rated power,AC drive
will automatically set other parameter of
motor name plate and motor model
parameter be careful to use
Depend
★
P11.03
Motor rated voltage
10V～2000V
Depend
★
P11.04
Motor rated current
P11.02<30kW：0.01A
P11.02>=30kW：0.1A
Depend
★
P11.05
Motor rated frequency
1.00Hz～600.00Hz
50.00Hz
★
P11.06
Motor rated RPM
1～60000rpm
Depend
★
P11.07
Motor rated power factor
0.500～1.000
Depend
★
r11.08
Motor rated torque
Read only,0.1Nm(P11.02<30KW);
1Nm(P11.02>30KW)
-
●
r11.09
Number of motor 1 pairs of
pole
Read only,It will auto calculate as per motor
rated frequency and rated rotating speed
-
●
P11.10
Auto-tune/self-learning
0：no auto tuning
1：Stationary auto tuning of Asynchronous
motor
It is suitable in the cases when the motor can
not de-couple form the load. The antotuning for
the motor parameter will impact the control
accuracy.
2：Rotatoinal auto tuning of Asynchronous
motor
Comprehensive motor parameter autotune
0
★