Vorwerk KOBOLD User Manual

18 Troubleshooting
Fault Possible causes and rectification
Aer connecting
the table vacuum to
the charing unit
or mains charger
solo, the charing
process does not
begin (no pulsating
function indicator).
• Ensure that the mains charger with charing unit
and the handheld vacuum cleaner are connected
and that the mains socket works (the function
indicator on the handle pulsates and indicates that
the handheld vacuum cleaner is being charged).
• Ensure that the handheld vacuum cleaner
is switched off for recharing.
The function
indicator flashes
quickly.
• The handheld vacuum cleaner is in safety mode;
this may be due to the baery being too hot.
• Disconnect the mains charger of the handheld vacuum
cleaner from the mains socket and let the handheld vacuum
cleaner cool down.
If the problem persists, please contact
Vorwerk's customer service department.
The handheld
vacuum cleaner does
not vacuum at all or
not as good as it used
to, and/it makes
abnormal sounds.
The nozzle may be blocked.
• Switch the handheld vacuum cleaner
off and unblock the nozzle.
The dust chamber may not be correctly inserted
in the handheld vacuum cleaner.
• Insert the dust chamber into the handheld
vacuum cleaner properly.
The dust chamber may be full.
• Empty the dust chamber.

Vorwerk KOBOLD Specifications

General

Brand	Vorwerk
Model	KOBOLD
Category	Vacuum Cleaner
Language	English