What to do if my VOSS.farming Poultry Kit Farm Equipment door doesn't open/close completely?
If the door of your farm equipment does not open or close completely, it could be due to dirty guide rails or an incorrectly positioned door. Remove any impurities from the guide rails and the door, and lubricate with oil if needed. Also, check the position of the door to ensure it is correctly aligned.
Why does my VOSS.farming Farm Equipment display not light up?
If the display of your farm equipment doesn't light up, it's likely due to an interrupted power supply. Check the batteries and replace them if necessary.
What to do if my VOSS.farming Poultry Kit door doesn't open/close?
If the door of your farm equipment doesn't open or close, it might be stuck. Check the ease of movement of the door or pull cord.
What does it mean when the status LED flashes every 40 seconds on my VOSS.farming Poultry Kit Farm Equipment?
If the status LED on your farm equipment flashes every 40 seconds and once when the display illumination is switched on, it could indicate a weak battery or error code E3. Check the battery status on the display; if it shows an empty battery, replace the batteries and adjust the door. You should also carry out the troubleshooting steps for error code E3.
Why does my VOSS.farming Poultry Kit Farm Equipment door open/close in the wrong direction?
If the door of your farm equipment opens or closes in the wrong direction, the cord may be wound up incorrectly. Check the winding direction and, if it's running the wrong way, change this in the door setup.
What to do if my VOSS.farming Poultry Kit door doesn't open/close depending on the light sensor?
If the door of your farm equipment doesn't open or close depending on the light sensor, ensure that the light mode is selected. Also, the light sensor might be defective or dirty, so clean it regularly. Make sure that the brightness value is properly adjusted. Extraneous light may also interfere with the light sensor.
Why does my VOSS.farming Poultry Kit door not open/close depending on the time or opens/closes at the wrong times?
If the door of your farm equipment doesn't open or close depending on the time, or opens or closes at the wrong times, the time mode may not be active. Ensure that the time mode is enabled. Also, the set times might be incorrect, so check and adjust them as needed.
What does error E3 mean on my VOSS.farming Poultry Kit Farm Equipment?
Error code E3 on your farm equipment can indicate several issues: a weak battery (check/replace batteries), the door exceeding 2kg (check and replace if necessary, then adjust the door), the front housing cover not correctly positioned (ensure it's correctly positioned and screwed in), or the motor not connected correctly (check and reconnect, then adjust the door). It may also indicate a damaged internal control board.
What does error E1 mean on my VOSS.farming Poultry Kit?
Error code E1 on your farm equipment can be caused by the door being too heavy (check the weight and replace if needed, then adjust the door) or the cord or door being jammed (remove impurities from the guide rails/door and lubricate with oil if necessary).
What does error E2 mean on my VOSS.farming Farm Equipment?
Error code E2 on your VOSS.farming farm equipment indicates that the input voltage is too high. Check that you have inserted the correct batteries and adjust the door.
General| Brand | VOSS.farming |
|---|---|
| Model | Poultry Kit |
| Category | Farm Equipment |
| Language | English |
Explains symbols used in the manual for warnings and information.
Details critical safety advice regarding device operation, electrical hazards, and potential injuries.
Details the functions and indicators shown on the device's digital display.
Explains the automatic operation of the poultry coop door based on time or light settings.
Clarifies the meaning of symbols found on the product labels, such as disposal and compliance marks.
Outlines essential considerations and requirements before mounting the device and connecting it to the door.
Describes how to manually open and close the door using the device's buttons.
Guides on how to set or adjust the current time on the device.
Explains how to adjust the cord length to set the upper and lower limits for door movement.
Lists common errors, their causes, and initial troubleshooting steps.
To Next Page
