32 561810 - 04.2021 - V1
INSTRUCTION MANUAL VOSS.FARMING POULTRY KIT
Error Cause Troubleshooting
Status LED ashes
every 40 seconds
and once when the
display illumination is
switched on
Weak battery
Error code E3
Check the charging status of
the battery on the display.
If the symbol indicates an
empty battery, change the
batteries and adjust the
door.
Carry out the
troubleshooting for error
code E3.
Status LED ashes
every two seconds for
two seconds
Error code E1
Error code E2
Carry out the
troubleshooting for error
code E1 or E2.
12.1 ERROR CODE TABLE
Error code Cause Troubleshooting
E1
Door is too heavy
Cord or door jammed
Check the weight of the door and
replace if necessary. Adjust the door.
Remove impurities from the guide
rails/door and lubricate with oil if
necessary.
E2 Input voltage too high
Check that the correct batteries are
inserted and adjust the door.
E3
Weak battery
Door has a weight of
more than 2kg
Front housing cover
has been removed
Motor not connected
correctly
Internal control board
damaged
Check/replace batteries
Check the weight of the door and
replace if necessary. Then adjust the
door.
Make sure that the front housing
cover is correctly positioned and
screwed in.
Check the connection from the
motor and reconnect if necessary.
Then adjust the door.
E4
Start-up settings for the
door are not complete
Adjust the door again.