GBR -9-
Before Using your Fridge
• When using your fridge for the r time, or after transportation, keep it
in an upright position for at lea 3 hours before plugging into the mains.
This allows ecient operation and prevents damage to the compressor.
• Your fridge may have a smell when it is operated for the r time. This is normal and
the smell will fade away when your fridge arts to cool.
USING THE APPLIANCE PART - 2.
Thermoat Setting
The fridge thermoat automatically regulates the
temperature of the compartment. Fridge temperatures
can be obtained by rotating the knob to higher
numbers, 1 to 5.
Important note: Do not try to rotate the knob
beyond position 1, it will op your appliance from
working.
Thermoat Settings
• Set the knob to a low/medium position, up to 3, for short-term orage of food in the
appliance.
• Set the knob to a medium position, 3 or 4, for long-term orage of food in the appliance.
• For long-term orage of food in the refrigerator, you can set knop maximum position
(4 - 5).
Larders (coolers) have not any freezer compartment but can cool up to 4-6°C.
Temperature Settings Warnings
• The ambient temperature, temperature of the freshly ored food and how often the door is
opened aects the temperature in the fridge. If required, change the temperature setting.
• It is not recommended that you operate your fridge in environments colder than 10°C
in terms of its eciency.
• When setting the thermoat, take into consideration how often the appliance door is
opened and closed, how much food is ored in the refrigerator, and the environment in
which the refrigerator is located.
• When the appliance is r switched on, allow it to run for 24 hours in order to reach
operating temperature. During this time, do not open the door and do not keep a large
quantity of food inside.
• Unplug your appliance during a power cut to prevent damage to the compressor. Once
power is reored, delay plugging in your appliance for 5 to 10 minutes. This will help
prevent damage to the appliance's components.
• Your appliance is designed to operate in the ambient temperature ranges ated in
the andards, according to the climate class ated in the information label. It is not
recommended that your fridge is operated in the environments which are outside of
the ated temperature ranges. This will reduce the cooling eciency of the appliance.
• Your appliance is designed to operate in the ambient temperature (N = 16°C - 32°C)
intervals ated in the andards, according to the climate class displayed on the
Thermostat knob
Lamp cover