GBR -14-
Repositioning the Door
• It is not possible to change the opening direction of your appliance door if door handles
are inalled on the front surface of the appliance door.
• It is possible to change the opening direction of the door on models without handles.
• If the door-opening direction of your appliance can be changed, contact the neare
Authorised Service Centre to change the opening direction.
BEFORE CALLING AFTER-SALES SERVICE
PART - 6.
Your fridge is not operating
Check if:
• There is power
• The plug is correctly connected to the socket
• The plug or mains fuse has blown
• The socket is faulty. Examine this by plugging your fridge into a working socket.
The appliance performs poorly
Check if:
• The appliance is overloaded
• The doors are closed properly
• There is any du on the condenser
• There is enough space near the rear and side walls.
Your fridge is operating noisily
Motor noise: Indicates the compressor is operating normally. The compressor may
cause more noise for a short time when it is r activated.
Bubbling noise and splash: Due to the ow of the refrigerant in the tubes of the
syem.
Air blowing noise: Indicates normal operation of the syem due to the circulation of
air.
There is a build-up of humidity inside the cooler
Check if:
• All food is packed properly. Containers mu be dry before being placed in the fridge.
• The fridge door is opened frequently. Humidity of the room enters the fridge when the
doors are opened. Humidity increases faer when the doors are opened more frequently,
especially if the humidity of the room is high.
The door is not opening and closing properly
Check if:
• There is food or packaging preventing the door from closing
• The door compartments, shelves and drawers are placed properly
• The door joints are broken or torn
• Your fridge is level.
To Next Page
Loading...
Need help?
General
