Voxx HR8D - Remote Control

26
8” MONITOR REAR SEAT VIDEO HEADREST SYSTEM Owner’s Manual
HR8A
HR8A SYSTEM SETUP SUBMENUS (continued)
Figure 38
WFMM Channel/Frequency Menu
Figure 37
FM CHANNEL
Selecting the FM Channel from the
Touch Screen:
1. Touch the SOURCE (S) icon to show the
MAIN Menu.
2. Touch the SETTINGS (
) icon to enter
the system setup sub-menu.
3. Touch the desired FM frequency. When
a channel/frequency is selected, the
Wireless FM Modulator screen will
display the selected channel/frequency.
NOTE: The WFMM menu is only
available on the “M1” monitor.
4. Touch the Home icon on the screen to
return to the SOURCE Menu and save
the setting.
Selecting the FM Channel from the
Remote Control:
1. Select “M1” on the Remote Control.
2. Press the SYSTEM MENU or PIX button to
enter SYSTEM MENU.
3. Use the UP and DOWN direction
buttons to select WFMM Wireless FM
Modulator and press the OK button
to enter the Wireless FM Modulator
sub-menu. (Figure 37)
4. Use the UP, DOWN, LEFT and RIGHT
direction buttons to select the best
channel/frequency from a  ve page list of
one hundred frequencies then press the
MENU/SELECT button to enter selection.
NOTE: When a channel/frequency is
selected, the Wireless FM Modulator
screen will display the selected channel/
frequency.
WIRELESS FM MODULATOR ON/OFF
Direct Access Button on the Remote
Control:
Press the FMM ON or OFF button on the
Remote Control (Figure 38) to turn the
Wireless FM Modulator ON or OFF.
When ON is selected, the channel/
frequency the system is displayed on the
lower lefthand side of the main screen.
When OFF is selected, FMM OFF will be
displayed on the lower left-side of the main
screen.
LANGUAGE
Language Sub-Menu
Figure 39
LANGUAGE from the Touch Screen:
1. Touch the SETTINGS ( ) icon to display
the SYSTEM MENU.
2. Touch LANGUAGE to enter the
Language menu and to select the
desired language.(Figure 39)
3. Touch the Home icon on the screen to
return to the SOURCE Menu and save
the setting.
LANGUAGE from the Remote Control
1. Select “M1” or “M2” on the Remote
Control.
2. Press the SYSTEM MENU or PIX button to
enter the SYSTEM MENU.
3. Use the UP and DOWN direction
buttons to select Language and press
the OK button to enter the Language
sub-menu. (Figure 39)
4. Use the UP and DOWN direction buttons
to select the desired language then press
the OK button to save the setting.
FMM ON/OFF
BUTTON
128-9406B HR8D, HR8A and HR8AD AUDIOVOX 05-20-2015.indd 526128-9406B HR8D, HR8A and HR8AD AUDIOVOX 05-20-2015.indd 526 5/20/2015 5:03:30 PM5/20/2015 5:03:30 PM