Voxx HR8D - Remote Control

27
8” MONITOR REAR SEAT VIDEO HEADREST SYSTEM Owner’s Manual
HR8A
HR8A SYSTEM SETUP MENUS (continued)
DEFAULT ANDROID ON/OFF
Default ANDROID Sub-Menu, Figure 40
With ON selected, the monitor will default
to ANDROID Mode each time the system is
turned ON. For example, if the user is playing
a game and the system is turned OFF, the next
time the system is turned ON, it will power up in
ANDROID Mode.
Default ANDROID from the Touch
Screen:
1. Touch the SETTINGS ( ) icon to display
the SYSTEM MENU.
2. Touch DEFAULT ANDROID and select ON or
OFF. (Figure 40)
3. Touch the Home icon on the screen to
return to the MAIN Menu and save the
setting.
Default ANDROID from the Remote
Control:
1. Select “M1” or “M2” on the Remote Control.
2. Press the SYSTEM MENU or PIX button to
enter the SYSTEM MENU.
3. Use the UP and DOWN direction buttons
to select DEFAULT ANDROID and press the
OK button to enter the Default ANDROID
sub-menu. (Figure 40)
4. Use the UP and DOWN direction
buttons to highlight ON or OFF and
press the OK button to make the
selection. (Figure 40).
IR TRANSMITTER ON/OFF
IR Transmitter Sub-Menu, Figure 41
IR Transmitter ON/OFF from the Touch
Screen:
1. Touch the HOME icon on the screen to
show the Source Menu.
2. Touch SETTINGS to enter the system
setup sub-menu.
3. Touch IR TRANSMITTER to select ON or
OFF. (Figure 41)
4. Touch the Home icon on the screen
to return to the MAIN Menu and save
the setting. When ON is selected,
IRT ON will be displayed on the
SYSTEM MENU screen. When OFF is
selected, IRT OFF will be displayed
on the SYSTEM MENU screen.
IR Transmitter ON/OFF from the Remote
Control:
1. Select “M1” or “M2” on the Remote
Control.
2. Press the IRT ON/OFF button to enter
the Sub-menu.
3. Use the UP and DOWN direction buttons
to highlight ON or OFF and press the OK
button to enter selection. When ON is
selected, IRT ON will be displayed on
the SYSTEM MENU screen. When OFF
is selected, IRT OFF will be displayed on
the SYSTEM MENU screen.
Or
1. Select “M1” or “M2” on the Remote
Control.
2. Press the SYSTEM MENU or PIX button to
enter SYSTEM MENU.
3. Use the UP and DOWN direction buttons
to highlight IR TRANSMITTER and press
the OK button to enter the sub-menu.
(Figure 41)
4. Use the UP and DOWN direction
buttons to highlight ON or OFF and
press the OK button to enter selection.
When ON is selected, IRT ON will be
displayed on the SYSTEM MENU screen.
When OFF is selected, IRT OFF will be
displayed on the SYSTEM MENU screen.
128-9406B HR8D, HR8A and HR8AD AUDIOVOX 05-20-2015.indd 527128-9406B HR8D, HR8A and HR8AD AUDIOVOX 05-20-2015.indd 527 5/20/2015 5:03:31 PM5/20/2015 5:03:31 PM