15
replaced. With this function the user can select the
backup file (stored in the Meter) that belonged to the
replaced Smart box and download it to the new Smart
box. After a restore is completed the system will
automatically be restarted and the system is back in
operation.
To be able to handle a restore the user needs to know
the serial number of the replaced and the replacing
Smart boxes. A serial number can be read on the
Smart box and also be seen using the diagnostics
menu option (pg.13). The serial number is an 8 digit
number e.g. 11030056.
The Meter can hold up to 20 Smart box backup files. If
changes are done in the setup of a Smart box its
backup file will be updated next time the Meter is
turned on. The old backup is then overwritten and no
longer available. If more than 20 Smart boxes have
been backed up the oldest backup file is deleted and
no longer available.
There are also maintenance functions to revert a
Smart box or the Meter to its default setup. This can be
practical if a used Smart box or Meter will be used on a
different type of truck or if the user would like to start
from a factory defined state.
Note that a restore operation cannot be canceled once
To Next Page
Loading...
General