6
2. 9150 Basics
Alarms
If there are active alarms a red flashing symbol will be
displayed. Depending on the alarm settings an alarm
may also make the built in buzzer sound and/or
activate meter outputs. Outputs are used e.g. for light
and/or audible indications outside the cab.
If there is an alarm press the F2 (Alarm) key to show
the alarm list. To silence the alarm press F4
(Acknowledge). If the cause of the alarm is already
removed the buzzer will become silent, outputs will
deactivate (if used), the alarm icon will disappear and
the alarm list will be cleared.
If the alarm cause is still present the buzzer will
become silent, outputs will deactivate (if used) and the
alarm icon will change to black and white non flashing.
The alarm list will still show the alarm.
If there is an alarm caused by an error and not by a
weight alarm the key F3 (Troubleshoot) is available.
Pressing F3 will open the diagnostics screen showing
the Smart box that the error is related to. The color
picture shows the status (Red – error / Green – OK) of
the
Smart box and its inputs/load cells.
VISHAY
PRECISION
GROUP
SI Onboard 9150
Menu Alarm Net Print
04/07/2011 07:36 AM
Total Gross: 42348 lb
12704 29644
Active
To Next Page
Loading...
General