Need help?Do you have a question about the VPG SI Onboard 9150 and is the answer not in the manual?
Details the functions of the F1, F2, F3, and F4 soft keys on the meter.
Explains how the system handles alarms, including audible alerts and visual indicators.
Describes the process when a trailer is coupled or uncoupled, and how the system reconfigures.
Explains how to turn the 9150 system on and off using the On/Off key.
Details the two display modes (day and night) to adapt to lighting conditions.
Describes the two main weight screens (graphical and numerical) and how to switch between them.
Relates to logging modes for weight data.
Configuration of meter display functions, unit, resolution, and compensation.
Adjusting date, time, and time format settings on the meter.
Selection of available languages for the meter interface.
Wizard for defining truck/trailer type, load cells, and smart boxes.
Process for calibrating weight displays with new installations or changes.
Settings for alarm handling, including buzzer and digital outputs.
Setup parameters for serial (RS232) printer communication.
Protection of setup access using a four-digit PIN code.
Examining system components (Meter, Smart boxes) for problems and displaying status.
Details the Smart box restore function and reverting to default setups.
Lists available vehicle configurations such as Truck, Truck + Trailer, Tractor + Jeep, etc.
Provides specific details for various vehicle configurations like Truck, Tractor Trailer + Pole, etc.
Describes the process of zeroing angular measurements for each Smart box.
Explains calibrating the system with an empty (tare) and loaded (full) vehicle.
Guides the user through the calibration process with options like Tilt Zeroing, Empty Vehicle, and Loaded Vehicle.
Details entering axle weights for true axle load configurations.
Details the built-in alarm buzzer and its activation for errors or weight alarms.
Describes using solid state relays for external warning lights or audible alarms.
Covers setting weight alarms for total weight and individual axle weights.
Explains how weight alarms are tripped and acknowledged.
Describes the standard mounting position on top of the dashboard or similar surface.
Explains mounting the meter hanging below a mounting surface.
Details mounting the meter in front of a surface, with options for angling.
Shows the rear view of the meter with connectors and terminal blocks.
Lists various error codes, their text, and explanations for system issues.
Provides steps for troubleshooting and resetting the 9150 system if problems persist.
Instructions on how to turn the 9150 system on and off.
Steps for accessing and configuring display settings like units and modes.
Guide for setting up the vehicle configuration and load cells.
Steps for initiating the calibration process, including zeroing and weight entry.
To Next Page
General