19
To set the start and end time of auto attendant announcement:
You can set the start and end time of the daytime announcement. The system
plays the nighttime announcement in the rest of the time.
When the console is idle, press MENU/SELECT.
Press or to scroll to Ans sys setup, then press MENU/SELECT or
/SKIP.
Press or to scroll to Auto att setup, then press MENU/SELECT or
/SKIP.
Press or to choose Set annc time, then press MENU/SELECT or
/SKIP.
Press /REPEAT or /SKIP to scroll between the hour (HH), minute (MM)
and AM/PM of start time and end time.
Press or to increase or decrease the digits and toggle between am and
pm. You can also press the dialing keys to enter the correct digits.
If you enter digits larger then 12 in the hour field, the system automatically
converts to the 12-hour time format.
7. Press MENU/SELECT to save the setting.
NOTE: The start time and the end time of the daytime announcement cannot be the same.
Otherwise, the setting cannot be saved.
1.
2.
3.
4.
5.
6.
•
Answering system basic setup
Auto attendant setup
To Next Page
Loading...
Need help?
General