VTech BM4000-BEAR - Parent Unit Display Messages

20
Getting started
21
Parent unit display messages
No link to CAM #
(# represents the selected baby
unt number).
The baby unt s out of range or
s turned off.
Battery low at Parent Unit
The battery level of the parent
unt s very low and needs to be
recharged.
Temperature too low at
CAM # (# represents the
selected baby unt number).
The temperature detected
from the selected baby unt s
below the selected mnmum
temperature.
Temperature too high at
CAM # (# represents the
selected baby unt number).
The temperature detected
from the selected baby unt s
above the selected maxmum
temperature.
Powering on...
The parent unt s turnng on.