VTech CS6199-4 User Manual

10
Telephone settings
Telephone base ringer volume
Press /VOL
+
or /VOL
-
on the telephone base to adjust the
ringer volume when the phone is not in use.
When you set the ringer volume to zero, the base ringer is off
and the telephone base announces, “ Base ringer is off.”
Ringer tone
You can choose from different ringer tones on each handset.
Press MENU when the handset is not in use.
Press or until the handset displays Ringers,
then press SELECT.
Press or until the handset displays Ringer tone,
then press SELECT.
The handset displays Tone: with the current setting displayed.
Press or to sample each ringer tone.
Press SELECT to save your selection. You hear a
conrmation tone.
If you turn off the ringer volume, you will not hear ringer
tone samples.
1.
2.
3.
4.
5.
Ringers
ANS ON
ECO
Ringer tone
ANS ON
ECO
Tone: 1
ANS ON
ECO

VTech CS6199-4 Specifications

Frequency

transmit frequency (handset)	1921.536-1928.448 MHz
transmit frequency (telephone base)	1921.536-1928.448 MHz
channels	5

Power Requirements

handset battery	2.4V Ni-MH
telephone base power	6V DC @ 400mA
charger power	6V AC @ 300mA

Memory

handset directory capacity	50 memory locations
handset directory digits	up to 30 digits
handset directory characters	15 characters