VTech CS6199-4 - Call Screening; Number of Rings Setting

43
Answering system settings
Call screening
Use this feature to choose whether incoming messages can be heard while they are
being recorded.
To turn this feature on or off:
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, then press SELECT.
Press or to scroll to Ans sys setup, then press SELECT.
Press SELECT to choose Call screening.
Press or to choose Screening: On or Screening: Off,
then press SELECT to conrm your selection. You hear a
conrmation tone.
Number of rings
You can set the answering system to answer an incoming call
after two, three, four, ve or six rings; or toll saver. With toll saver
selected, the answering system answers after two rings when you
have new messages, or after four rings when you have no new
messages. This enables you to check for new messages and avoid
paying unnecessary long distance charges if you are calling from
outside your local area.
Press MENU when the phone is not in use.
Press or to scroll to Answering sys, then press SELECT.
Press or to scroll to Ans sys setup, then press SELECT.
Press or to scroll to # of rings, then press SELECT.
Press or to choose 6, 5, 4, 3, 2 or Toll saver,
then press SELECT to conrm your selection. You hear a
conrmation tone.
1.
2.
3.
4.
5.
1.
2.
3.
4.
5.
Ans sys setup
ANS ON
ECO
Call screening
ANS ON
ECO
Screening: On
ANS ON
ECO
Ans sys setup
ANS ON
ECO
# of rings
ANS ON
ECO
3
ANS ON
ECO