VTech DS6511 User Manual

21
Telephone settings
Set date and time
If you subscribe to caller ID service, the day, month and time are set automatically
with each incoming call. You can also set the date and time manually.
Press MENU when the handset is not in use.
Press or to highlight Set date/time, then press
SELECT.
Press or to select the month then press SELECT, or use
the dialing keys to enter a two-digit number (01-12).
Press or to select the date then press SELECT, or use
the dialing keys to enter a two-digit number (01-31).
Press or to select the year then press SELECT, or use
the dialing keys to enter a two-digit number (00-99) then
press SELECT.
Press or to select the hour then press SELECT, or use
the dialing keys to enter a two-digit number (01-12).
Press or to select the minute then press SELECT, or use
the dialing keys to enter a two-digit number (00-59).
Press or to highlight AM or PM.
Press SELECT to save the settings. Then the handset returns
to the previous menu. You hear a confirmation tone.
The telephone plays two beeps if you enter an invalid number.
1.
2.
3.
4.
5.
6.
7.
8.
9.
Set date/time
ECO
Date: MM/DD/YY
ECO
Time: HH/MM --
ECO

VTech DS6511 Specifications

Technical Specifications

transmit frequency handset	1921.536-1928.448 MHz
transmit frequency telephone base	1921.536-1928.448 MHz
channels	5

Power Requirements

handset power requirement	2.4V Ni-MH battery
telephone base power requirement	6V DC @ 400mA
charger power requirement	6V AC @ 300mA

Memory

handset directory memory locations	200 memory locations
handset directory digits	up to 30 digits
handset directory characters	15 characters