VTech DS6511 User Manual

Caller ID
44
Caller ID log
If you subscribe to caller ID service provided by your telephone service provider
and/or cell phone service provider, information about each caller will appear after
the first or second ring. If you answer a call before the caller’s information appears,
it will not be saved in the caller ID log.
The caller ID log stores up to 50 entries. Each entry has up to 24 digits for the
phone number and 15 characters for the name. If the phone number has more
than 15 digits, only the last 15 digits appear. If the name has more than
15 characters, only the first 15 characters are shown and saved in the
caller ID log.
Caller ID log entries are shared by all system handsets. Any modifications made
on one handset apply to all.
You can review, redial, and copy an entry into the directory.
Entries appear in reverse chronological order.
When the caller ID log is full, the oldest entry is deleted to make room for new
incoming call information.
XX missed calls shows when there are new caller ID log entries that have not
been reviewed.
Call log empty shows when you access the caller ID log without records.
Only one system handset can review the caller ID log at a time. If a handset
tries to enter the caller ID log while another handset is already in it, its screen
displays Not available.
Memory match
If the incoming telephone number matches the last seven digits of a telephone
number in your directory, the name that appears on the screen matches the
corresponding name in your directory.
For example, if Mike Smith calls, his name appears as Mike if this is how you
entered it into your directory.
The number shown in the caller ID log will be in the format sent by the telephone
service provider. The telephone service provider usually delivers 10-digit phone
numbers (area code plus telephone number). If the phone number of the caller does
not match a number in your directory, the name will appear as it is delivered by the
telephone service provider.
•
•
•
•
•
•
•
•

VTech DS6511 Specifications

Technical Specifications

transmit frequency handset	1921.536-1928.448 MHz
transmit frequency telephone base	1921.536-1928.448 MHz
channels	5

Power Requirements

handset power requirement	2.4V Ni-MH battery
telephone base power requirement	6V DC @ 400mA
charger power requirement	6V AC @ 300mA

Memory

handset directory memory locations	200 memory locations
handset directory digits	up to 30 digits
handset directory characters	15 characters