VTech DS6511 User Manual

Getting started
5
Installation options
Your telephone base is ready for tabletop use. If you want to mount your telephone
on a wall, use the provided wall mount bracket to connect with a standard dual-
stud telephone wall mounting plate. If you do not have this mounting plate, you
can purchase one from many hardware or consumer electronics retailers. You may
need a professional to install the mounting plate.
Tabletop to wall mount installation
If you have already installed the telephone for tabletop use, unplug the telephone
line cord from the telephone wall jack, and unplug the telephone base power
adapter from the wall outlet. Remove the telephone line cord and the power
adapter cord from the grooves.
1.
Route the telephone line cord through the rectangular hole on the wall mount
bracket and plug it into the telephone wall jack. Route the power cord out of
the telephone base and plug it into an electrical outlet not controlled by a wall
switch.
2.

VTech DS6511 Specifications

Technical Specifications

transmit frequency handset	1921.536-1928.448 MHz
transmit frequency telephone base	1921.536-1928.448 MHz
channels	5

Power Requirements

handset power requirement	2.4V Ni-MH battery
telephone base power requirement	6V DC @ 400mA
charger power requirement	6V AC @ 300mA

Memory

handset directory memory locations	200 memory locations
handset directory digits	up to 30 digits
handset directory characters	15 characters