VTech DS6511 User Manual

42
Directory
Dial a speed dial entry
Press and hold a dialing key (0 or 2-9) to dial the number stored in the
corresponding speed dial location via the home line.
When the speed dial location is empty, the handset shows the speed dial list.
See Assign a speed dial entry on page 41 to add a new entry.
Delete a speed dial entry
Press SELECT when the phone is not in use.
Press or to highlight Directory, then press SELECT.
Press or to highlight Speed dial, then press SELECT.
Press or to choose the desired speed dial location.
Press DELETE.
-OR-
Press SELECT twice. Press or to highlight Clear SD, then press SELECT.
When the handset displays Clear SD #X?, press SELECT. You hear a
confirmation tone.
Deleting the speed dial entries does not affect the entries in the directory.
•
1.
2.
3.
4.
5.
6.

VTech DS6511 Specifications

Technical Specifications

transmit frequency handset	1921.536-1928.448 MHz
transmit frequency telephone base	1921.536-1928.448 MHz
channels	5

Power Requirements

handset power requirement	2.4V Ni-MH battery
telephone base power requirement	6V DC @ 400mA
charger power requirement	6V AC @ 300mA

Memory

handset directory memory locations	200 memory locations
handset directory digits	up to 30 digits
handset directory characters	15 characters