VTech DS6511 User Manual

Caller ID
47
Dial a caller ID log entry
Search for the desired caller ID log entry (see Review the caller ID log on
page 45).
When the desired entry displays, press /HOME, /CELL or to dial.
Save a caller ID log entry to the directory
Search for the desired caller ID log entry (see Review the caller ID log on
page 45).
When the desired entry displays, press SELECT. Then the handset displays
Edit number.
Use the dialing keys to edit the number, when necessary.
Press or to move the cursor to the left or right.
Press DELETE to backspace and erase a digit.
Press and hold DELETE to erase the entire entry.
Press and hold PAUSE to insert a dialing pause (a p appears).
Press SELECT to move to the name. The handset displays Edit name.
Use the dialing keys to add or edit the name.
Press or to move the cursor to the left or right.
Press DELETE to erase a character.
Press and hold DELETE to erase all characters.
Press SELECT when done and the screen shows Saved.
If you save an entry which already exists in the directory, the handset displays
Number repeated and then returns to previous screen.
1.
2.
1.
2.
3.
•
•
•
•
4.
5.
•
•
•
6.

VTech DS6511 Specifications

Technical Specifications

transmit frequency handset	1921.536-1928.448 MHz
transmit frequency telephone base	1921.536-1928.448 MHz
channels	5

Power Requirements

handset power requirement	2.4V Ni-MH battery
telephone base power requirement	6V DC @ 400mA
charger power requirement	6V AC @ 300mA

Memory

handset directory memory locations	200 memory locations
handset directory digits	up to 30 digits
handset directory characters	15 characters