EasyManua.ls Logo

VTech DS6771-2 - Auto Connection; Connect a Paired Cell Phone or Headset; Disconnect a Paired Cell Phone or Headset; Review the Cell Devices List

VTech DS6771-2
38 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
18
19
Auto connection
A cell device may be disconnected from
the telephone base when:
The Bluetooth feature of your
connected cell device is turned off.
The power of your cell device is
turned off.
Your cell device is not within range of
the telephone base.
After the cell device is disconnected,
wait for about 1 minute. Then, power on
the cell device, turn on the Bluetooth
feature, or move it within range of the
base, the base will try to reconnect to
the cell device. If you disconnect the
cell device from the cell devices list,
the base will not attempt to reconnect
unless your cell device is moved out of
range and back in range again.
NOTE
If your cell device does not reconnect to
the base automatically, follow the section
below to connect it manually.
Connect a paired cell phone or
headset
If you need to connect your paired cell
phone or headset to the telephone
base manually:
1. Press CELL 1 and/or CELL 2 on the
telephone base when it is not in
use. The CELL 1 and/or CELL 2
light flashes.
2. When the cell phone or headset is
connected to the telephone base, you
hear two beeps. The corresponding
status icon (
1
/
2
) displays.
The corresponding device light
(CELL 1 and/or CELL 2 ) turns on.
Disconnect a paired cell phone
or headset
If you need to disconnect a paired cell
phone or headset from the telephone
base, refer to the user’s manuals of your
cell phone or headset for instructions to
disconnect a Bluetooth device.
If you press and hold CELL 1 and/or
CELL 2 on the telephone base, the
existing paired cell phone in that slot
will be erased. See Add a Bluetooth
enabled cell phone and Add a
Bluetooth enabled headset on how to
pair and connect a new cell phone or
headset.
Review the cell devices list
1. Press MENU on the handset when it
is not in use.
2. Press or to choose Bluetooth,
and then press SELECT.
3. Press or to choose Device list,
and then press SELECT.
Download phonebook contacts
You can download phonebook entries
to your DS6771 telephone system via
Bluetooth wireless technology. Each
downloaded phonebook are stored in
the handset phonebook with up to
24 digits for each phone number and
15 characters for each name.
Before downloading the phonebook,
make sure the cell phone is paired and
connected to the DS6771. Make sure
the handset battery is charged for at
least 10 minutes.
Place your cell phone next to the
telephone base while downloading.
To download contacts from your
Bluetooth cell phone:
1. Press MENU on the phone when it is
not in use.
2. Press or to choose Bluetooth,
and then press SELECT.
3. Press or to choose Download
PB, and then press SELECT. The
handset displays Select a device
briefly.
If there is no cell phone paired to
the system, the handset displays
Pair cell first and then returns to
the previous menu.
4. Press or to choose a desired
device when necessary, and then
press SELECT.
If the selected device is not
available, the handset displays
DX not avail and then returns to
the previous menu.
During the download, the handset
flashes Downloading...
All other idle system handsets display
Downloading...
5. When the downloading process
completes or when the memory is
full, the handset displays Entries
added: XXX. Then the handset
returns to the Bluetooth menu.
NOTE
S
Certain cell phones do not support SIM
card download. If this is the case, try
transferring the contacts from your SIM
card to your cell phone memory first,
and then download from your cell phone
memory. For more information on how to
transfer contacts from your SIM card to
your cell phone memory, see the user’s
manual of your cell phone.
When downloading the phonebook from
your Bluetooth enabled cell phone, some
data may not transfer. For example, if you
have home, mobile and work numbers for a
particular contact, the three categories may
not transfer to your DS6771.
For certain cell phones, you may need to
press a key on your cell phone to confirm
the phonebook download.
For Android and Blackberry cell phones,
you may also
download your cell
phone phonebook to
your DS6771 via the
VTech Contact Share
application. Scan the
QR code on the right,
or go to
www.vtechphones.com/apps/contact_share
for application download.

Table of Contents

Related product manuals