VTech DS6771-2 - Find Handset; Redial List; Review a Redial List Entry; Dial a Redial List Entry

28
29
4. Press SELECT to dial the displayed
number.
To access a number from the
caller ID log while on a call:
1. Press MENU.
2. Press or to choose Caller ID log,
and then press SELECT.
3. Press or to scroll to the desired
entry.
4. Press SELECT to dial the displayed
number.
To access a number from the
redial list while on a call:
1. Press REDIAL to enter the redial list.
2. Press , or REDIAL repeatedly to
browse to the desired entry.
3. Press SELECT to dial the displayed
number.
Find handset
This feature helps you find misplaced
handsets.
To start paging:
• Press FIND HANDSET on the
telephone base.
All idle handsets ring and their
screens display ** Paging **.
To end paging:
• Press /HOME, /CELL, CANCEL,
,or any dialing key (0-9, or )
on a handset.
-OR-
• Press FIND HANDSET again on the
telephone base.
-OR-
• Place the handset in the telephone
base or charger.
NOTE
• Do not press and hold FIND HANDSET
for more than four seconds. It may lead to
handset and headset deregistration.
Redial list
Each handset stores the last
10 telephone numbers dialed (up to
30 digits). When there are already
10 entries, the oldest entry is deleted to
make room for the new entry.
Review a redial list entry
1. Press REDIAL to enter the redial list.
2. Press , or REDIAL repeatedly
to browse until the desired entry
displays.
Dial a redial list entry
1. Press REDIAL to enter the redial list.
2. Press , or REDIAL repeatedly
to browse until the desired entry
displays.
3. Press /HOME or to dial using
the home line.
-OR-
Press /CELL to dial using the cell line.
-OR-
1. Press /HOME or to use the home
line.
-OR-
Press /CELL to use the cell line.
2. Press REDIAL to enter the redial list.
3. Press , or REDIAL repeatedly
to browse until the desired entry
displays.
4. Press SELECT to dial the displayed
number.
Delete a redial list entry
1. Press REDIAL to enter the redial list.
2. Press , or REDIAL repeatedly
to browse until the desired entry
displays.
3. When the handset displays the
number you want to delete, press
DELETE.
Multiple handset use
Intercom
Use the intercom feature for
conversations between two devices.
Your telephone base supports up to
five devices. You can buy additional
expansion handsets (DS6072) or
headsets for this telephone base.
1. Press INT on the handset when idle.
2. Your handset shows Intercom to:
Use the dialing keys to enter a device
number (1-5).
The handset shows Calling HS X.
The destination handset rings and
shows HS X is calling.
4. To answer the intercom call on the
destination handset, press /HOME,
/CELL, , or any dialing key (0-9,
, or ). Both handsets now show
Intercom.
-OR-
To answer the intercom call on the
destination headset, press ON/OFF
key on the headset.
5. To end the intercom call on either
handset, one party presses OFF
or places the handset back in the
telephone base or handset charger.
Both handsets display Intercom ended.
-OR-
Press ON/OFF key on the headset.
NOTE
S
• You can cancel the intercom call before it
is answered by pressing OFF.
• If the destination handset does not
answer the intercom call within 100
seconds, or if it is out of range, on a call,
or accessing the phonebook or caller ID
log, your handset displays Unable to call
and then returns to idle mode.
• You can press OFF or MUTE on
the destination handset/headset to
temporarily silence the intercom ringer.
• Only one intercom call can be established
at a time.
Answer an incoming call during
an intercom call
If you receive an incoming home call
during an intercom call, you will hear an
alert tone. Handsets flash and display
the caller ID.
If you receive an incoming cell call
during an intercom call, you will hear
an alert tone. Handsets flash and
display the caller ID.
Using a handset:
• To answer a home call, press
/HOME. The intercom call ends
automatically.
• To answer the cell call, press OFF to
end the intercom call. The telephone
continues to ring. Then press
/CELL.
• To end the intercom call without
answering the outside call, press
OFF. The intercom call ends and the
telephone continues to ring.
Using a headset:
• Press ON/OFF key to end the
intercom call. The telephone
continues to ring. Press
ON/OFF key again to answer the
home call.
NOTE
• Headset cannot answer a cell call.
Call transfer using intercom
While on an outside call, you can use
the intercom feature to transfer the call
from one device to another.
1. Press INT on the handset during a
call. The current call is put on hold.
2. Your handset shows Intercom
to: Use the dialing keys to enter a
handset number (1-5).