30
31
Your handset shows Calling HS X.
The destination handset rings and
shows HS X is calling.
3. To answer the intercom call on the
destination handset, press /HOME,
/CELL, , or any dialing key (0-9,
, or ). Both handsets now show
Intercom.
-OR-
To answer the intercom call on the
destination headset, press ON/OFF
key on the headset.
4. To transfer the call, press OFF on the
initiating handset or place the initiating
handset back in the telephone base or
charger.
5. To end the call, press OFF on the
destination handset or place the
destination handset back in the
telephone base or charger.
-OR-
Press ON/OFF key on the headset.
NOTE
• You can cancel the intercom call before it
is answered by pressing OFF.
• If the destination handset does not
answer the intercom call within 100
seconds, or if it is out of range, on a call,
or accessing the phonebook or caller ID
log, your handset displays Unable to call
and then returns to idle mode.
• You can press OFF or MUTE on the
destination handset to temporarily
silence the intercom ringer.
• Only one intercom call can be established
at a time.
Phonebook
The phonebook can store up to
1000 entries, which are shared by all
handsets. Each entry may consist of a
telephone number up to 30 digits, and a
name up to 15 characters.
Any additions, deletions or edits made
on one handset will be reflected on
other handsets.
If the telephone number in the
phonebook exceeds 15 digits, a dash
appears after the 14th digit and then the
remaining digits are shown beginning
with a dash alternately.
Add a phonebook entry
1. Enter the number when the handset
is not in use. Press SELECT, then go
to Step 5.
-OR-
Press MENU when the handset is not
in use.
2. Press or to choose Phonebook,
and then press SELECT.
3. Press SELECT again to choose Add
new entry.
4. When Enter number
displays, use the
dialing keys to enter
a number (up to 30
digits).
-OR-
Copy a number from the redial list by
pressing REDIAL. Then press
, or REDIAL repeatedly to find
the desired number. Press SELECT
to copy the number.
5. Press SELECT to move on to the
name.
6. When Enter name
displays, use the
dialing keys to
enter a name (up
to 15 characters).
Additional key
presses show
other characters on that key. The first
character of every word is capitalized.
7. Press SELECT to save. You hear
a confirmation tone and then the
handset returns to the previous
menu.
While entering names and numbers,
you can:
• Press or to move the cursor to
the left or right.
• Press DELETE to erase a digit.
• Press and hold DELETE to erase all
digits.
• Press and hold PAUSE to enter a
dialing pause (a p appears).
• Press to add ( appears) or
to add # ( appears)
.
• P
ress 0 to add a space (for entering
names only).
Review phonebook entries
Entries are sorted alphabetically.
1. Press when the handset is not
in use. The screen displays the first
entry in the phonebook.
2. Press or to browse through the
phonebook, or use the dialing keys to
start a name search.
-OR-
1. Press MENU when the handset is not
in use.
2. Press or to choose Phonebook,
and then press SELECT.
3. Press or to
choose Review, and
then press SELECT.
4. The screen displays
displays the first
phonebook entry.
Press or to
browse through the phonebook.
• If the telephone number in the phonebook
exceeds 15 digits, - appears in front of
the telephone number and shows the
remaining numbers alternately.
Alphabetical search
1. Follow the steps in Review the
phonebook entries to enter the
phonebook.
2. Use the dialing keys to enter the
letter associated with the name.
For example, if you have entries for
Jenny, Jessie, Kristen and Laura in
your phonebook, press 5 (JKL) once
to see Jenny (when Jenny displays,
press to see Jessie), twice to see
Kristen, or three times to see Laura.
If there is no name entry matching
your search, the next closest match
in alphabetical order appears. If
necessary, press or to browse.
Enter number
ECO
ANS ON
-
Enter name
ECO
ANS ON
Review
ECO
ANS ON
p
q
To Next Page
Loading...
