2
3
Overview
Telephone base overview
1 –
Headset charging cradle
2 – /PLAY/STOP
• P
ress to play messages.
• P
ress to stop message playback.
/SKIP
• Press to skip to the next
message.
/REPEAT
• Press to repeat a message.
• Press twice to play the previous
message.
X/DELETE
• Press to delete the playing
message.
• When the handset is not in use,
press twice to delete all old
messages.
3 –
+
/VOL/
–
• Press to adjust the volume during
message playback.
• Press to adjust the telephone
base ringer volume when the
handset is not in use.
4 – /ANS ON light
• On when the answering system is
on.
5 – /ANS ON
• Press to turn the answering
system on or off.
6 – CELL 1 and CELL 2
• Press to connect the paired cell
Bluetooth device.
• Press and hold to add or replace
a Bluetooth device.
7 – CELL 1 and CELL 2 lights
• On when the telephone base
is paired and connected with a
Bluetooth device.
• Flashes when the telephone base
is in discoverable mode.
8 – Charging cradle
9 – IN USE light
• On when the handset or headset
is in use, or the answering system
is answering a call.
• Flashes when there is an
incoming call, or another
telephone sharing the same line
is in use.
10 – FIND HANDSET
• Press to page all system
handsets and headset.
Handset overview
1 – Handset earpiece
2 – LCD display
3 – MENU/SELECT
• Show the menu.
• While in a menu, press to select
an item, or save an entry or
setting.
4 – VOICE
• Press to activate the
voice-controlled application on
your connected cell phone.
5 – OFF/CANCEL
• Hang up a call.
• Silence the ringer temporarily
while the handset is ringing.
•
Press and hold to erase the
missed call indicator while the
phone is not in use.
•
Press to return to the previous
menu; or press and hold to
return to idle mode, without
making changes.
6 –
• Press to add a space when
entering names.
7 –
• Press repeatedly to show other
dialing options when reviewing a
caller ID log entry.
8 – INT
• Press to start an intercom
conversation or transfer a call.
9 – Microphone
10 – MUTE/DELETE
• Mute the microphone during a
call.
• Delete digits or characters while
using the dialing keys.
• Silence the ringer temporarily
while the handset is ringing.
• Delete the displayed entry while
reviewing the phonebook, caller
ID log, call block list or redial list.
11 –
• Make or answer a call using the
handset speakerphone.
• During a call, press to switch
between the speakerphone and
the handset.
12 –
• While you have set the dial mode
to pulse and on a call, press to
switch to tone dialing temporarily.
13 –
• Press repeatedly to add or
remove 1 in front of the caller ID
log entry before dialing or saving
it to the phonebook.
• Press and hold to set or dial your
voicemail number.
j
k
l
p
r
q
m
n
o
a
b
c
d
e
h
i
f
g
To Next Page
Loading...
