37
When you access the call block list without
records, the screen shows List empty.
Edit a call block list entry
Search for the desired caller ID log
entry (see Review the call block list).
When the desired entry displays,
press SELECT. The handset displays
Enter number.
Use the dialing keys to edit the
number.
Press SELECT. The handset displays
Enter name.
Use the dialing keys to edit the name.
Press SELECT to save the entry. The
handset displays the revised entry.
You hear a confirmation tone.
Save a caller ID log entry to the
call block list
Search for the desired caller ID log
entry (see Review the Caller ID log).
When the desired entry displays,
press SELECT.
Press or to choose
To Call block, and then press
SELECT. Then the handset displays
Enter number.
Use the dialing keys to edit the
number, when necessary.
5. Press
SELECT to move to the name.
The handset displays Enter name.
6. Use the dialing keys to add or edit the
name.
7. Press
SELECT when done.
If you save an entry which already exists
in the call block list, the handset displays
Number repeated and then returns to
previous screen.
•
1.
.
3.
4.
5.
6.
1.
.
3.
4.
•
Delete a call block list entry
Search for the desired caller ID log
entry (see Review the call block list).
Press DELETE. You hear a
confirmation tone and the handset
displays the next entry.
If the call block list is empty after an entry
is deleted, the handset displays List
empty. You hear a confirmation tone.
Mute first ring
Your telephone rings once for blocked
calls. You can choose to mute the first
ring for all incoming calls, so that there
will be no ring for blocked calls. By
default, the first ring is set to On.
Press MENU when the handset is not
in use.
Press 7464# on the handset.
Scroll to choose First ring:On to
keep the first ring, or First ring:Off
to mute the first ring.
Press SELECT to save.
If you have muted the first ring, you will
hear one ring less before the answering
system and voicemail answer the
incoming calls.
1.
.
•
1.
.
3.
4.
•