VTech Innotab 3 - Initial Setup and Personalization

6
•Plugtheadaptor(soldseparately)intotheACadaptorjackonthetopof
InnoTab
®
3.
•Plugtheadaptorintoawallsocket.
NOTE: The use of an adaptor will override the batteries. When the toy is
not going to be used for an extended period of time, unplug the
adaptor.
Standard Guidelines for Adaptor Toys
• Thistoyisnotintendedforusebychildrenunder3yearsold.
• Thetoymustonlybeusedwithatransformerfortoys.
• Theadaptorisnotatoy.
• Nevercleanapluggedintoywithliquid.
• Donotconnectthetoytomorethantherecommendednumberofpower
supplies.
• Donotleavethetoypluggedinforextendedperiodsoftime.
• ThetoyisonlytobeconnectedtoClassIIequipmentbearingthe
following symbol ).
• Pleaseexaminethetransformerregularlyfordamagetothecord,plug,
enclosure and other parts. In the event of such damage, please stop
using the damaged transformer until the damage has been repaired.
How to Play
STEP 1: Turn InnoTab
®
3 On
Turn InnoTab
®
3 on by holding down the Power button for
a few seconds. A VTech
®
logo and an InnoTab
®
3 logo will
appear and remain onscreen for a few seconds.
STEP 2: Personalise Your Profile
The first time you turn on InnoTab
®
3, you will be asked to
personalise your profile. When you are asked to enter your
name, use the on-screen keyboard to type in your name,
andtouchOKwhenyou’redone.Whenyouareaskedto
take your profile picture, touch the on-screen shutter
icon,thentouchOK.
G
E
T
T
I
N
G
S
T
A
R
T
E
D