VTech IS 8121-3 User Manual

106
Alert setting
Turn on or off the message alert tone
When the message alert tone is set to on,
and there is at least one new message, the
telephone base beeps every 10 seconds.
The message alert tone is preset to off.
1. Press MENU/SELECT when the phone
is not in use.
2. Press q CID or p to scroll
to Answering sys then press
MENU/SELECT to select.
3. Press q CID or p to scroll to Ans
sys setup then press MENU/SELECT
to select.
4. Press q CID or p to scroll to Msg
alert tone then press MENU/SELECT
to select.
5. Press q CID or p to choose On or
Off.
6. Press MENU/SELECT to save.
• You hear a confirmation tone.
NOTE
• The message alert tone beeps only if
all the following conditions are met.
• Answering system is on.
• Message alert tone setting is on.
• There are new messages.
Voicemail settings
[Telephone service provider]
Set speed dial voicemail number
This feature lets you save your voicemail
number for quick access when you
press and hold the 1 key.
To set your voicemail number:
1. Press MENU/SELECT when the phone
is not in use.
2. Press q CID or p to scroll
to Settings, and then press
MENU/SELECT.
3. Press q CID or p to highlight
Voicemail #, then press
MENU/SELECT.
4. Use the dialing keys to enter the
voicemail access number (up to 30
digits) provided by your telephone
service provider.
• Press q CID or p to move the
cursor to the left or right.
• Press MUTE/DELETE on the handset
to erase a digit.
• Press and hold MUTE/DELETE on
the handset to erase all digits.
• Press and hold REDIAL/PAUSE to
enter a three-second dialing pause
(a P appears).
5. Press MENU/SELECT to confirm.

VTech IS 8121-3 Specifications

General

Brand	VTech
Model	IS 8121-3
Category	Telephone
Language	English