VTech IS 8121-3 User Manual

32
Make, answer or end a cell
call
Make a cell call
1. Press CELL on the handset. The
handset displays Select a device.
• If you have only one cell phone
connected to the telephone base,
press MENU/SELECT to select the
only device.
• If you have two cell phones
connected to the telephone,
press q CID or p to select
a cell phone and then press
MENU/SELECT.
2. Enter the telephone number on the
handset, then press CELL to dial.
Predial a cell call
1. Enter the telephone number.
2. Press CELL on the handset to dial.
• If you have only one cell phone
connected to the telephone base,
it is automatically selected to make
cell calls.
• If you have two cell phones
connected to the telephone base,
the screen displays Select a device.
Press q CID or p to select a
cell phone and then press MENU/
SELECT.
Answer a cell call
• Press CELL or on the handset.
End a cell call
• Press OFF/CANCEL, or put the handset
in the telephone base or charger.
NOTES
• The screen displays Unable to call if
your cell phone is in use.
• You can also use your cell phone to
answer the call. If you answer with
your cell phone, it disconnects from
the telephone base.
• The screen shows the elapsed time
as you talk (in hours, minutes and
seconds).
• When predialing (preview
numbers before dialing), press
MUTE/DELETE on the handset
or telephone base to backspace
and delete; press and hold
REDIAL/PAUSE to insert a dialing
pause (a P appears).
• Make a cell call using the cell lines
of your telephone system instead
of using the remote voice control
feature, if you need to press dialing
keys (0-9, TONE or QUIET#) during
a call.

VTech IS 8121-3 Specifications

General

Brand	VTech
Model	IS 8121-3
Category	Telephone
Language	English