VTech IS 8121-3 User Manual

46
Redial list
Each handset stores the last 10 dialed
numbers (up to 30 digits each) in the
redial list. The list of dialed numbers
include both dialed home calls and cell
calls.
Review a redial list entry
1. Press REDIAL/PAUSE in idle mode.
2. Press q CID, p or
REDIAL/PAUSE repeatedly to browse
until the desired number displays.
The handset beeps twice at the end
of the list.
3. Press OFF/CANCEL on the handset to
exit.
Redial a call from list
• When the desired redial entry
displays on the handset, press
HOME/FLASH or to dial
using the home line, or press
CELL to dial using the cell line.
- OR -
1. Press HOME/FLASH or to use
the home line, or press CELL to use
the cell line.
2. Press REDIAL/PAUSE to enter the
redial list.
3. Press q CID, p or
REDIAL/PAUSE repeatedly to browse
until the desired entry displays.
4. Press MENU/SELECT to dial the
displayed number.
Save a redial entry to the phonebook
1. Press REDIAL/PAUSE on the handset
in idle mode.
2. Press q CID, p or
REDIAL/PAUSE repeatedly to browse
until the desired number displays.
3. Press MENU/SELECT twice.
4. The screen displays Enter number. Use
the dialing keys to edit the number, if
necessary.
• Press q CID or p to move the
cursor to the left or right.
• Press MUTE/DELETE on the handset
to erase a digit.
• Press and hold MUTE/DELETE on
the handset to erase all digits.
• Press and hold REDIAL/PAUSE to
insert a three-second dialing pause
(a P appears).
5. Press MENU/SELECT.
6. The screen displays Enter name. Use
the dialing keys to enter a name (up to
15 characters). Press a key repeatedly
until the desired character shows on
the screen.
• Press q CID or p to move the
cursor to the left or right.
• Press 0 to add a space.
• Press MUTE/DELETE on the handset
to erase a character.
• Press and hold MUTE/DELETE on
the handset to erase all characters.
7. Press MENU/SELECT. You hear a
confirmation tone.

VTech IS 8121-3 Specifications

General

Brand	VTech
Model	IS 8121-3
Category	Telephone
Language	English