67
Set Smart call blocker on/off
The Smart call blocker feature is set to
on by default.
1. Press MENU/SELECT to enter the
main menu when the handset is not
in use.
2. Press q CID or p to scroll to Smart
call blk. Press MENU/SELECT.
3. Press MENU/SELECT again to select
SCB On/Off.
4. Press q CID or p to highlight On
or Off, then press MENU/SELECT
to save the setting. You hear a
confirmation tone.
NOTE
• If you set SCB On/Off to Off, all
settings under Set profile will be
invalid.
Set profile
There are five profile setting options,
which allows you to quickly set up Smart
call blocker.
1. Press MENU/SELECT to enter the
main menu when the handset is not
in use.
2. Press q CID or p to
scroll to Smart call blk. Press
MENU/SELECT.
3. Press q CID or p to scroll to Set
profile, then press MENU/SELECT.
4. Press q CID or p to select one
of the following options, then press
MENU/SELECT.
Screen unknown
• Screen any home calls without
numbers or with numbers not saved
in the directory, allow list, or star
name list.
• This profile setting sets the
telephone to screen all unknown
home calls and asks the callers to
say their names before putting the
calls through to you. See Screen
unknown home calls.
Screen robot
• Screen robocalls.
- This profile setting sets the
telephone to screen all
unknown home calls and asks
the callers to press the pound
key (#) before putting the calls
through to you. See Screen
robocalls.
To Next Page
Loading...
