57
Bluetooth setup
To use a Bluetooth enabled cell phone
with your IS8121/IS8121-2/IS8121-3/
IS8121-4/IS8121-5, you must first pair
and connect it with the telephone base.
The IS8121/IS8121-2/IS8121-3/IS8121-
4/IS8121-5 telephone base and all
system handsets can be used to make
or answer calls on the cell phone line.
Bluetooth wireless technology operates
within a short range (up to 15 feet).
When you pair a Bluetooth cell phone
or Bluetooth headset to the telephone
base, keep the device within 15 feet
of the telephone base for optimal
performance.
Add a Bluetooth cell phone
Before you begin, make sure that
you have cellular coverage and your
Bluetooth enabled cell phone is not
connected to any other Bluetooth
device. Refer to your cell phone user’s
manual to learn how to search for or
add new Bluetooth devices.
Pair and connect a cell phone
1. Choose a slot to pair the cell phone.
Press and hold CELL 1 or CELL 2 on
the telephone base for about four
seconds until the CELL 1 or CELL 2
light flashes.
• If there is already a cell phone in
the slot, the existing cell phone
will be erased from cell devices
list.
2. Turn on the Bluetooth feature of your
cell phone and search for or add new
devices.
Once your cell phone finds your
VTech phone ( VTech DECT 6.0 ),
press the appropriate key on your
cell phone to continue the pairing
process.
• All cell phones that are connected
to the telephone base are
disconnected temporarily until
the pairing process is complete.
When a device is successfully paired
and connected, the corresponding
status icon (
1
and/or
2
) displays.
The corresponding device light on the
telephone base (CELL 1 or CELL 2) turns
on.
To Next Page
Loading...
Need help?
General
