7
Connect
You can choose to connect the telephone
base for desktop usage or wall mounting.
• Use only the adapters provided.
• Make sure the telephone is not connected to
the switch controlled electric outlet.
• The adapter’s prongs are not designed to
hold the weight of the telephone. Make sure
you connect the adapter to a wall outlet that
is in vertical or floor mount position. Do not
connect it to undermount and ceiling outlet.
Otherwise, your telephone would fall out of
the outlet.
• If you subscribe to digital subscriber line
(DSL) high-speed Internet service through
your telephone line, make sure you install
a DSL filter (not included) between the
telephone line cord and telephone wall jack.
Contact your DSL service provider for more
information.
Connect the telephone base
Connect the charger
Mount the telephone base
1. Pull the integrated wall mount bracket
and release it from the tabletop
orientation.
2. Rotate it down into wall mount
position and then push it into the
telephone base until it clicks into place.
To Next Page
Loading...
